• Cypher Model5000测量仪HPI500

    详细信息

     品牌:Cypher Model 5000  型号:HPI500  加工定制:否  
     外形尺寸:400*800 mm 重量:1 ㎏ 用途:检测  

    深圳湾边贸易供应美国HPI 5000核辐射测量仪价格优惠

    厂家:Health Physics Instruments

    型号:Cypher Model 5000, 

    英文:MODEL 5000 CYPHER SURVEY METER

    中文名称:HPI 5000核辐射测量仪

     

     

    测量仪是一种先进的巡检仪。操作方便,运用的数字技术大大地提高了其运行性能。它可接大多数的G-M记数管,正比记数管和闪烁体探头,液晶显示输出信息。具有模拟显示和数字显示,易读、精确

    仪器具有多种模式,包括剂量率,累积剂量和计数。每种模式都是单独编程的,可只设置一种模式而作为简单的剂量率表使用,也可同时设置六种模式。功能上的可选择性大大方便了用户,当用户的应用功能改变时它的功能项也可重新设置。

     

    仪器的操作由前板上的四个软按钮控制,右边的两个按钮由用户自己定义。可把它们设置为背景灯和报警控制键,也可设置为锁定和重启控制键。这些软键设置大大简化了仪器的操作,避免了复杂的菜单选项。

    仪器的数字技术使得设置,刻度和维修得到大大的简化。许多操作和刻度功能既可在前板上也可在仪器板内进行控制和设置。晶体计时器保证了数据的准确度;可调的死时间校正使得大多数的探头的线形范围得到延伸。仪器小巧,坚固,轻便。功能的可选择性使得仪器和用于简单的或复杂的应用。

     

    规格

    尺寸:7.5in(19cm)L x 4.2in(10.7cm)W x 4.45in(11.3cm)H

    重量;2.25lb(1kg)带电池。

    外部控制键:四按钮(电源开关,模式键,*),按电源开关5秒可重启仪器。

    内部控制:一个按钮,用于刻度模式。

    内部结构:易于装卸的电路板,电池安装在尼龙固定器里的铝板上。所有的零件都是标准型号。

    探测器:可接G-M记数管,正比记数管和闪烁体探头。

    显示:2x16字符液晶显示,有背景灯,背景灯的显示时间可在前板上可调。

    声音报警:内置发音装置,频率2.4kHz。可设置为柔和或大音量。

    高电压:对于G-M记数管,正比记数管在3002000V可调。对于闪烁体探头在3001600V可调。实际的测量高压值可显示出来。

    电池:6AA电池,100小时寿命。电池状态可显示,有电池电量不足报警,电量太低可自动关闭仪器。

    刻度和参数存储器:数据可存储40年。数据存储不需要用到电池。

     

    操作

    模式:6种模式,可选;剂量率,累积剂量CPMCPS,刻度,还有两种模式由用户定义。

    有设置、校准和维护模式。

    单位:remradRSvBqdisctsCPMCPS

    时间基数:/s/m/h

    前缀:pnumKMGT

    用户自定义键:*键是用户在各种功能中定义的软键,电源开关键和模式键也可用作功能键。

    菜单选择:操作简单。单级菜单。只用模式键可迅速地进入所有的正常模式。

    剂量率模式:数值显示,单位和时间模式可选。数值更新时间为1秒。自动更换量程。三位有效数字。

    如需要也可显示曲线图。

    CPM/CPS模式:和剂量率模式基本相同,只是单位不同。

    累积模式:显示累积剂量或累积计数,同时显示累积的时间。

    累积计数模式:计数可达6位数,计数时间在1秒到999分钟内可调。

    软键*key:用户定义用于剂量率,累积剂量CPMCPS模式。可选择设置项:背景灯,发声装置,大值保持,重启和量程锁定功能。

    模拟显示:更新率为每秒10次,满数值范围为2.5510,标尺满宽度为2.2in(5.6cm)

    量程:0.11,000,000CPM     1nSv/h-1Sv/h

    精确度:1~1,000,000CPM1%内。剂量和剂量率精确度取决于探头。

    温度范围:-15°C50°C

    湿度范围:095%

     

    可选

    输入连接器类型:标准BNCMHVCSHV也可以。

    可选项:探头,电缆和探头固定装置,维修手册。

     

    γ闪烁体探头

     

    此为NaI闪烁体探头。它和计数率表使用时,能用于本底水平的γ放射性测量;和MCA(多道分析仪)使用时,可以给出γ谱。它的高灵敏可和标准的GM探测器相比。探头包括一个高质量的NaI晶体和光电倍增管。细长的外形设计使得容易抓握。

     

    规格

    探测射线类型:γ射线

    NaI晶体尺寸:1"(2.5cm)直径x 1"(2.5cm)

    γ灵敏度:大约300,000cpm/mR/h(CS137)

    能响范围:30KeV以上

    分辨率:~8%0.662MeV

    尺寸:1.4"(3.5cm)直径x 8.5"(21cm)

    高压:300-1000V

    输入连接器:BNC

     

    英文介绍

     

    "CYPHER" SURVEY METER, MODEL 5000
     
       

     SMOOTH MOVING POINTER BARGRAPH

     BUILT IN SCA

     AUTORANGING W/ RANGE HOLD

     USER PROGRAMMABLE

     LOG AND LINEAR BARGRAPH

     RATE, SCALER AND INTEGRATE MODES

     DIGITAL CALIBRATION

     USER DEFINED KEYS, UNITS, & RANGES

     DEADTIME CORRECTION

    The “Cypher” is an advanced survey instrument. It is very user friendly and uses digital technology to greatly enhance its operation. It works with most GM, proportional, and scintillator probes and displays the information on a backlit alphanumeric LCD. The display has a moving pointer bargraph that closely approximates a meter movement. It is smooth, easy to read and accurate. The digital level and the bargraph scale are also shown on the display.

    The instrument has many different modes including rate, integrate, and scaler. Each mode is independently programmable and may be turned off. It can be set up as a simple ratemeter with only one mode or it can be set up for all 6 modes. Thus it can be easily adjusted to suit your application. If that application changes it is easy to reconfigure for a new one. This instrument helps you get the readings you want. It is difficult to misread the data with the units and range information shown right on the display.

    The 4 soft-key buttons on the front panel operate the instrument. The two on the right are user defined. One user may want to use them for light and beeper while another may want to use them for range hold and reset. The soft-keys also help to simplify the operation of the instrument. There is only one level of display; you are never lost in a maze of menus.

    The digital nature of the instrument means that setup, calibration and maintenance are greatly simplified. Many of the operational and calibration functions can be controlled or set from either the front panel or the inside panel or both. The accuracy of the data is assured by a crystal controlled timebase and the switchable deadtime correction extends the linear range of most probes. 

    The “Cypher” survey instrument is small, rugged, and light. It is simple to operate, loaded with features and programmable for either simple or advanced uses. It is the perfect all around instrument.

    Specifications


    Mechanical
     Size overall: 7.5 in. (19 cm) L x 4.2 in. (10.7 cm) W x 4.45 in. (11.3 cm) H w/o probe holder. Gasketed splashproof aluminum enclosure. Top panel is milled and anodized with nonerasable nomenclature. Bottom painted. LCD window is acrylic.
     Weight: 2.25 lb. (1 kg) with batteries.
     External controls: 4 pushbuttons (Power, Mode, *, and  ). Power button when held down for 5 seconds resets the microprocessor. 
     Internal controls: 1 pushbutton for entry into calibrate mode.
     Internal construction: Circuit board hinges for easy access. Batteries are mounted on an aluminum panel in nylon holders. ICs are socketed. All components are standard types.
     Probe clip: For 1" Dia handle. Others sizes available.

    Electrical
     Detectors: Accepts GM, proportional and scintillation probes.
     Display: 2 line x 16 character alphanumeric supertwist LCD with backlight. Backlight may be timed or on/off. Contrast adjustable from front panel.
     Audio: Built in piezo beeper at 2.4 kHz. Selectable to beep at every 1, 8, 64 or 2048 counts. May be switched to off, soft or loud. 
     Single channel analyzer: may be switched in or out. Threshold, window & gain digitally set from front panel, internally or both. Gain has three settings, Threshold and window 200 settings.
     High voltage: Adjustable from 300 to 2000 Volts for GM and proportional detectors. 300 to 1600 Volts for Scintillators with 100 meg voltage divider. Actual measured HV can be displayed on the screen. HV monitored for proper operation.
     Batteries: 6 AA cells for 100 hour life. Battery condition displayed at turn on and turn off. Low battery warning during operation. Instrument will automatically turn off when batteries are too low for proper operation. May be set for auto turn off.
     Calibration and parameter storage: Data stored in permanent memory for minimum of 40 years. Batteries not required for storage. 

    Operational
     Modes: 6 modes available, not all need be used; Rate, Integrate, CPM or CPS, Scaler, and 2 user defined to any mode with separate calibration. Calibration, Setup, and Maintenance mode also available.
     Units: rem, rad, R, Sv, Bq, dis, cts, CPM, CPS. Time base: /s, /m, /h Prefix: p,n,u,m,K,M,G,T and none. User defined units available.
     User defined keys: *, and  are user defined soft keys for each mode. Power and Mode buttons are also used as soft keys for some functions.
     Menu selection: Simple to operate. Single level menus. Mode button will access all normal modes quickly and easily.
     Rate mode: Shows numeric value of rate with user selected units and timebase. Updated every second. Prefix automatically selected but may be preprogrammed. Limited to 3 significant digits.  Autoranging w/range hold. Bargraph also displayed if desired.
     CPM/CPS mode: Same as rate mode except units are CPM or CPS. May also be programmed as cnts/m or cnts/s.
     Integrate mode: Shows Integrated dose or counts in user configured units. Also shows integration time.
     Scaler mode: Shows counts up to 6 digits. Count time variable from 1 sec to 999 min. Beeper from counts or timeout.
     Softkey * and  key: User defined for rate, integrate, and CPM/CPS modes. Choices include: Light, Beeper, Hold, Reset, TC, and Range Hold.
     Bargraph: Moving digital pointer on background of scale markings. Updated 10 times every second. Full scale of 2.5, 5 or 10 and log are user selectable. Bargraph width is 2.2 in (5.6 cm). Markings for each scale are user changeable from inside the instrument. Full scale markings are actively shown on the display in the proper units & prefix but may be turned off. 
     Additional setup options: Display exchange 1st and 2nd lines, time to range up, time to range down, min range, max range, decimal point-prefix change limit. Auto turn-off time. 

    Response
     Range: 0.1 to 1,000,000 CPM with multiplier.
     Accuracy: Within 1% or 2 digits for Count rates from 1 to 1,000,000 CPM. Timebase is crystal controlled. Radiation accuracy is dependent on probe. 
     Time constant: Dynamically set depending on count rate but has settings of short, med and long. 
     Dead time correction: Corrects up to 10 times actual rate. May be independently set on or off for each mode.

    Environmental
     Temperature range: -15°C to 50°C 
     Temperature dependence: HV ±2%, Rate ±1%, over temp range.
     Humidity range: 0 to 95% non condensing

    Options
     Input connector: BNC standard. MHV, C, and SHV also available. 
     Options: Probes, cable and probe holder. Repair manual.
     Equipment: Supplied w/ manual, batteries, scales, probe holder
    Specifications subject to change without notice 

  • 留言

    *详细需求:
    *手  机:
    联 系 人:
    电    话:
    E-mail:
    公  司:
    谷瀑服务条款》《隐私政策
深圳市湾边贸易有限公司 地址: 深圳市龙华新区观澜大道75号田背花园E单元806
内容声明:谷瀑为第三方平台及互联网信息服务提供者,谷瀑(含网站、客户端等)所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布,其真实性、准确性和合法性均由店铺经营者负责。谷瀑提醒您购买商品/服务前注意谨慎核实,如您对商品/服务的标题、价格、详情等任何信息有任何疑问的,请在购买前通过谷瀑与店铺经营者沟通确认;谷瀑上存在海量店铺,如您发现店铺内有任何违法/侵权信息,请在谷瀑首页底栏投诉通道进行投诉。