Bar Phantoms
Precise determination of camera intrinsic resolution, collimator spatial resolution, field size and linearity.
Flood Phantoms
A means of lighting scintillation camera's crystal to determine response uniformity over the entire field.
Thyroid Uptake Neck Phantom
Designed to simulate a patient’s neck.
Triple Line Insert
Used to produce three 1 mm diameter parallel lines of tracer material spaced 7.5 cm apart.
Cardiac Insert
Provides a multi-function simulation of the left ventricle, and can be used to evaluate SPECT imaging of cold defects within the "myocardium."
Hoffman 3-D Brain Phantom™
Provides the anatomically accurate three dimensional simulation of the radioisotope distribution found in the normal brain.
Hollow Sphere
Designed for use in all circular and elliptical SPECT cylinders.
PET Phantom - NEMA 2007/IEC 2008
Consists of a body phantom, a fillable lung insert and an insert with six various size spheres that are fillable from the outside of the phantom.
PET Scatter Phantom™ - NEMA
Contains a fillable line source that runs parallel to the center axis of the cylinder and offset a distance of 4.5 cm.
PET Sensitivity Phantom™ - NEMA
Consists of six concentric tubes that slide into each other. The innermost tube is fillable. The outer tubes are placed over the filled inner tube and imaged, adding a tube for each image.
PET-CT Phantom
Includes internal structures (three rods and six spheres) which, when imaged with both modalities, can demonstrate how accurately the two image sets are aligned.
Jaszczak SPECT Phantom
Provides consistent performance information for any SPECT or PET system.
Flangeless Deluxe SPECT Phantoms
The flangeless SPECT Phantom meets the requirements set by ACR.
Anthropomorphic SPECT Phantom
Used for the evaluation of non-uniform attenuation and scatter compensation methods. The phantom consists of a large, body-shaped cylinder with lung, liver and spine inserts.
Lung-Spine SPECT Phantom
The Lung-Spine Phantom consists of two chambers that are shaped to simulate the lungs.
